10 Pro Maintenance Tips to Extend Your VFFS Machine Life to 15+ Years

A well-maintained VFFS machine can run 15+ years—but poor maintenance cuts life to 3–5 years and causes costly downtime.

Follow these 10 expert tips to keep your machine fast, accurate, and trouble-free.

✅ Daily Maintenance (5 Mins)

1. Clean sealing jaws: Remove powder/film residue—prevents leaky seals.
2. Check film tracking: Ensure alignment; adjust if skewed.
3. Lubricate guide rails: Use food-grade oil (food models).
4. Inspect air pressure (pneumatic): Maintain 0.5–0.7 MPa.

✅ Weekly Maintenance (20 Mins)

5. Tighten belts/chains: Slippage reduces speed by 15–20%.
6. Clean dust filters: Servo motors overheat if clogged.
7. Test sensors: Ensure filling/sealing sensors work—avoids mis-fills.

✅ Monthly/Quarterly (1–2 Hours)

8. Calibrate dosing system: Verify accuracy (±0.5%).
9. Replace worn parts: Sealing bands, knives, bearings—don’t wait for failure.
10. Update controller software: Fix bugs, boost performance.

Biggest Mistakes to Avoid:

• ❌ Using non-genuine spare parts (causes rapid wear).
• ❌ Ignoring small leaks/jams (leads to major breakdowns).
• ❌ Skipping calibration (accuracy drops → product waste).

Our Service Promise:

All our VFFS machines include:

• Free 1-year warranty + spare parts kit
• Online video support for maintenance
• Global service network for on-site help

Conclusion:

Maintenance = Profit.

10 minutes a day prevents $10k+ annual downtime and doubles machine life.

Call to Action:

Download our Free VFFS Maintenance Checklist (Daily/Weekly/Monthly)—print and use in your factory.